OneCNCXR8 Version 63.20 is now released.

DXF import export
Many adjustments have been made in this version as an ongoing ubdate to the DXF file transfer in and out.

Mill Swarf
The 5 Axis simultaneous Swarf function has had some adjustments to better handle small arc type surfaces as found on junctions or corners on chamfered junctions.

STL Import
STL import has been adjusted to better handle STL imported files.

Mill Pocket
Mill Closed pocket function has had some adjustments to better handle by pocket by pocket and pocket by level.

Open Pocket
Open pocket is different than closed pocket and will only handle by level for multiple pockets.
For open pockets by pocket the Open Pocket boundaries are selected individually.

Lathe Rough Cycles
line numbers posted for lathe rough cycles in some cases is adjusted in this release to ensure correst line numbers for the cycles..

Languages
Japanese and Korean languages updates are included in this release

Lathe Rough
Lathe Turn Rough toolpath has been adjusted to prevent toolpath out of boundary moves

Lathe Finish
Lathe Turn Finish toolpath gouging was adjusted to prevent error at toolpath start,

Dimensions
Dimension line width prints but not shown on screen was adjusted in this release.

Special Note on OneCNC Licencing

OneCNCXR8 can be used without any connection to the internet.

OneCNC applications are designed to operate without web access to assist with complete data protection.

Updating OneCNC it is still simple using another PC that does have web access to download your updates..

Users can go to the OneCNC web using the dongle number and serial number to download the OneCNC Update then take it to the OneCNC PC to update.

This method allows you to have complete control of your manufacturing files not associated with the internet.

Combined with your OneCNC Perpetual licence assists in providing full digital dater protection. 

OneCNCXR8 Version 63.20 is now available to all licenced users from the OneCNC Update server.

OneCNCXR8 Release 63.18

This release has new features:

SOLIDWORKS 2021 direct file has been added to all versions of OneCNCXR8

Direct file import is now available for SOLIDWORKS 2021.

This now means the OneCNC can import directly all SOLIDWORKS files from SOLIDWORKS 2004 up to SOLIDWORKS 2021

NEW FEATURE in OneCNCXR8 Milling Versions

OneCNC XR8 Express Advantage Professional and Expert all have this new feature.

In Mill Stock toolpaths the facing function has a new feature conntrolled automatically by the boundary selection.

If facing a part like this and the inner and outer boundaries are selected when using the facing function it will automatically rapid over the island space at the same set plunge clearance.

Set to Zig Zag it will be like this pic

Set to single direction it would look like this

I the part is smaller and the user does not want it to lift and rapid over the space just do not select the inner boundary.

Other Updates in this release

Mill Version
4 Axis
Many refinements in 4 axis full spiral around and along and wrap.
Simulation 4 axis was updated
In certain cases earlier version files may have to be edited if there is a message to do so.

Swarf Machining
The swarf machining in 5 axis simultaneous had a problem with Zero angle settings causing exception now corrected

Mill Profile
Large offset caused a problem now corrected.

Chamfer Tool
Chamfer tool preview was corrected.

Lathe Version
4 Axis

Many refinements in 4 axis full spiral around and along and wrap.
Simulation 4 axis was updated
In certain cases earlier version files may have to be edited if there is a message to do so.

Lathe Threading
There was an Unexpected frame in External Thread dialog Japanese version now corrected.

 Wire EDM Version
Wire EDM buttons on main wire dialog were corrected.

All Versions of OneCNCXR8

Languages
New Japanese language update added.
New Korean language update added

Dimensions
Leader arrows were corrected.

Text
New test was being added to layer 0 rather than active layer.

Special Note on OneCNC Licencing

OneCNCXR8 can be used without any connection to the internet.

OneCNC applications are designed to operate without web access to assist with complete data protection.

Updating OneCNC it is still simple using another PC that does have web access to download your updates..

Users can go to the OneCNC web using the dongle number and serial number to download the OneCNC Update then take it to the OneCNC PC to update.

This method allows you to have complete control of your manufacturing files not associated with the internet.

Combined with your OneCNC Perpetual licence assists in providing full digital dater protection. 

OneCNCXR8 Version 63.18 is now available to all licenced users from the OneCNC Update server.

OneCNCXR8 Version release 63.14

Thread Dialog
There was a problem with alignment in the Japanese language in this dialog so we adjusted it in this release.

Language Update
There was an update to the Japanese language in this update.

Job Sheet
The Tool Summary in the job sheet now reflects the usage order of the file

OneCNCXR4 Files
It was reported that text was missing in OneCNCXR8 importing OneCNCXR4 files. This was corrected in this release.

Gear function
Causes exception in some cases was corrected on this version

OneCNCXR8 Version 63.14 will be available in the OneCNC update server for all OneCNCXR8 licenced users.