Update OneCNCXR2 V8.32 all versions release date 8th September 2007

OneCNCXR2 all versions

Adjustment to DXF import to better handle invalid entities being output by other CAD.

OneCNCXR2 All Milling versions

The Hole wizard was modified to better handle switching between incremental and absolute during editing and changing of absolute and incremental during editing.

Hole wizard chamfer was modified to eliminate the confusion between absolute and incremental as it now just works from material top.

OneCNCXR2 Lathe all versions

OneCNCXR2 lathe post was altered on the general settings page General Format> Tool Format.

There were three settings in the box T0101 T101 and T1

There are now just 3 settings T0101 and T101

There is no change in the action the T1 was removed to assist in eliminating confusion.

If a machine post requires the T1 format you would now remove the {D} offset in the post.

Note:
T0101format actually means T01 being the tool number and the next 01 being the offset format not the ability of 9999 too. T101 being the less popular the T1 is the tool number only and the following 01 again being the offset.

There is no need for any changes to your post with this change the modification has been made just to assist in preventing incorrect in the lathe post.

OneCNCXR2 Language update

OneCNCXR2 V8.29 covers a significant upgrade to the Dutch version language.

OneCNCXR2 Milling Versions

Updated the extents preview dialog to now show the model inside the extents this was lost in changing to Windows Vista versions but this ability has now returned.

OneNCXR2 Profiler Versions

OneCNCXR2 Profiler professional automatic nesting has had a major restructure to handle angular nesting correctly. There was an anomaly if the part was pre rotated before multiple nesting the sheet would sometimes also rotate.

Special Note on OneCNCXR2 Profiler Express and Professional

For OneCNCXR2 profiler users your post may need to be adjusted if your machine accepts Z axis values. Because OneCNCXR2 now can output XYZ in certain applications you need to examine your post and remove the {Z} from the Rapid line format and the Feed line format to ensure that you do not get Z values in the output. This would normally only happen if you have geometry drawn at a Z value other than Z Zero. If you had geometry drawn at other than Z zero and posted it it could add a Z value if the {Z} was not removed from those 2 post lines mentioned. This could cause a machine alarm or cause the head not to be at the correct Z if your machine accepts Z values.

Update OneCNCXR2 V8.28 all versions release date August 09 2007

OneCNCXR2 All Versions:

Dimensions:
OneCNC Dimensions were modified to allow the diameter symbol to be used in true type fonts
Before there was a problem with the slash not aligning with the zero with invalid true type fonts

DXF Translation:
DXF Translation has had some modification to assist in importing more odd entities found being exported by various unknown CAD.

OneCNC Calculator:
The calculator with-in the dialogs has been corrected to work in all languages. This is not the graphic calculator that comes up with the F8 key.

This allows dialogs that require values to be entered to directly interactively handle mathematical calculations in-line with data entry.

For example 2*(9*9) entered and hit Enter Key value becomes 162 as the value used.

OneCNC WireEDM Only:

OneCNC Wire EDM Open Shape:
Wire EDM has been modified in open shape s the point selected turns red appropriately.

Wire EDM open shape function functionality now accepts selection of cut from either direction now instead of requiring direction towards zero.