OneCNC Series Updates

This is a history of all OneCNC updates.

You may notice sometimes there can be a jump in version numbers.

This is due to intensive and continual internal testing where we thoroughly test versions before releasing proven functional updates.

To download updates, see our OneCNC Updates page.

OneCNCXR8 Release 62.56

We released today OneCNCXR8 version 62.56

The major changes in this release are:

Pocket Entry point
Select pocket custom start point this is only available within one pocket boundary selection.
Pre-selecting multiple pockets by automatic selection the custom selection ability is greyed out.
There was an adjustment to this logic to better handle islands withing the boundary.

Planes Dialog
Termination while using planes dialog was caused if each function was not completed so we made adjustments in this dialog to automatically complete.

Toolpath Template
The number of templates control logic was adjusted

Korean language translation update was added to this release

Pocket Cutter Comp
The lead in cutter comp logic was changed to better handle islands finish passes with islands.

This OneCNCXR8 62.56 is now available in the OneCNC update server.


OneCNCXR8 Release 62.52

OneCNCXR8 62.52 Released

These are the main changes in this version

Lathe cycle line numbers
Lathe turn rough with finish line numbering was adjusted.

Japanese Language
Updated language added

Lathe Turn Rough Boundary
Lathe turn rough boundary had some adjustments to maintain correct boundary control.

Lathe Turn Finish
Lathe turn finish had a start problem in certain non-straight entries.

Dimension line prints but not shown on screen

Profile Wall taper
Wall taper in profile had a problem on direction of taper angle which was changed

Profile taper and vertical was adjusted for finish with cutter comp setting
Profile taper and vertical was adjusted for the finish at bottom only setting

OneCNCXR8 Version release 62.52 is available in the OneCNC update server for XR8 licenced users


OneCNCXR8 Release 62.50

OneCNCXR8 Version Release 62.50

Importing Models
This release included a major update to imported models using Solidworks STEP IGES Parasolid SAT and VADfs. .
This update assists importing models with problem surfaces.

Drill Cycle
Simulation/preview was adjusted to show the G98 retract to rapid plane which may have indicated a collision when in the machine cycle there would not have been.

Drill Plunge Clearance
There has been a correction to the drill plunge clearance.

Smart boundary
Using bore rough has had adjustment to prevent termination when using smart boundary

Mill Profile Angle
The second dialog for wall angle was using radians this is now using angle.

Print Preview
This has been corrected to remove error messages about paper size

The dimension value was being overwriting when a diameter radius or degree symbol was added.
Dimension line was not angled if outside extension lines

Constant Stepover
This had some internal settings changes due to supplied support files.

Change to DXF Import
There was a problem importing DXF Files

Taper tool Vertical
There was a change to taper tool vertical setting

OneCNCXR8 Release 62.50 is available in the OneCNC update server.